DESCRIPTION:
Electronic Engine Stethoscope:
• Use to locate & identify engine noise
• Super sensitive microphone pick-up
• Flexible non-conductive shaft
• Cushioned headphones
Component Stethoscope
• Detect & isolate noisy components
• Enables road test diagnosis
• 4 channel sensor selector unit
• 4 pick up sensors – 4.8m long cords
INSTRUCTIONS:
Electronic Engine Stethoscope
• Connect headphone jack into stethoscope unit
• Turn unit on with volume control dial & set to mid level
• Put headset on & place probe onto part to be tested.
• Use to detect & diagnose worn pistons, faulty lifter, bearing & gear noise, manifold leaks – also use to locate wind & water leaks in doors & windscreens.
Component Stethoscope
• Attach 4 sensor clamps to suspected source of noise
• Use either Velcro straps or cable ties to secure the clamp wires.
• Plug headphone jack into selector box & turn on with volume control & set to mid level
• Operate component or test drive vehicle to duplicate the problem noise.
• Adjust volume to desired level & rotate the selector box knob between the 4 channels, until the source of the noise is isolated.
• Use to trace drive-train, under-bonnet & under-dash source of noises.
Stethoscope & 4 channel selector box require a 9 volt battery – supplied